MODEL:14 FT Full Deck Tilt - Tandem Axle
GVWR:14000 lbs
AXLE CONFIG:tandem
AXLE:(2)-7000lb.
BRAKES:electric
HITCH TYPE:bumper pull
Trailer Sales
Menu
MODEL:14 FT Full Deck Tilt - Tandem Axle
GVWR:14000 lbs
AXLE CONFIG:tandem
AXLE:(2)-7000lb.
BRAKES:electric
HITCH TYPE:bumper pull
Are you looking for a better solution to loading and unloading skid loaders, mini excavators, compact tractors or other types of equipment? Where traditional ramp trailers present a challenge with higher load angles and the inconvenience of ramps that have to be repositioned, The Big Tex Full Deck Tilt Trailer eliminates the need for ramps with a gravity powered tilting deck.
Designed for easy loading, this trailer features a knife edge approach which creates a smooth and level entry point onto the deck. Dexter 4-inch drop axles ensure a lower deck height and low load angle of approximately 9 degrees. This lower load angle reduces incline and ensures easy and proper loading of equipment.
The tilting deck is mounted with a pivot point strategicaly located which allows it to tilt into the loading position via gravity. A hydraulic cushion cylinder provides the resistance for slow tilting down movement.
Models – BIG TEX 14FT Heavy Duty Full Tilt Bed Equipment Hauler
This Tail lays flush to the ground eliminating the “bump” that you would normally have to drive over. This is especially useful when Loading Equipment with small wheels, winching vehicles onto the deck or Loading in Wet/icy conditions
The Heavy Duty 12k spring loaded, jack saves you time and energy. When parking your trailer you simply pull the foot pin and press the jack foot to the ground, instead of having to crank to lower the jack foot. The spring loaded foot also quickly retracts to the up position to save even more time and energy.
These couplers are height adjustable to allow you to level the trailer with the towing vehicle.
7 way plug that comes from the trailer harness.
Clearly the best option in the industry in axles, Dexter combines quality, value, and consistency far above any other axle on the market today!
The fenders are heavy gauge diamond plate steel for increased durability. They can also be easily removed for off-road use or easy replacement. Not only are diamond plate fenders tougher than the typical smooth plate, they also look tougher.
To assist you when loading….Prevents Wheels from going over the front of the trailer
Hydraulic dampening cylinder makes tilting up and down smooth and easy. The bed is cushioned as it gently comes to rest using a hydraulic dampening cylinder. Convenient, low maintenance tilt equipment trailers with no ramps to move, simply unlatch, tilt, and load.
The rubrail adds not only protection to the trailer along the side but also provides multiple position tie town points to secure your load. These give you almost unlimited tie down points.
When it comes to trailers, Big Tex has designed the industry’s best tongue anywhere. They utilize channel to Reduce Condensation and Rust in the tongues to ensure that the tongue on your unit will not flex or fail when loaded. The Channel is Stronger and Thicker than many tube steel tongues in the marketplace.
Some photos may show optional features. There are many options and features so please check with our staff as they will be happy to assist you.
BC Cargo and their Service Providers make every reasonable effort to ensure the accuracy of information on this website. If for any reason the information is not correct BC Cargo and their Service Providers are not responsible for an errors on these pages. Please verify any information in question prior to making a purchase.
4125 Palisades Place Armstrong, BC, Canada, V0E 1B6
Call:
Toll Free
HOURS OF OPERATION
Mon - Fri:
8:00am - 5:00pm
Saturday:
9:00am - 3:00pm
Sunday:
Closed
© 2024 BC Cargo Trailers. All Rights Reserved
